The table below lists the items available in the Track and Road Info Modes.
no. Description
1 Speed
It is displayed increased by 5% and together with the set unit of measurement (km/h or mph).
2 Engine Coolant temperature (°C or °F)
The temperature display range goes from +40°C to +125°C (+104°F ÷ +257°F).
When the temperature is higher than +125°C (+257°F), the graduated scale is replaced by the red
flashing “HIGH” message.
In case of overheating, if possible, it is recommended to ride at reduced speed to allow the
cooling system to lower the engine temperature. If this is not possible due to conditions, stop
and turn the engine
If the motorcycle continues to be used when the engine is overheated, severe damage may occur.
When the engine temperature returns to normal, continue riding by frequently checking the in‐
strument panel indication.
3 Riding Mode in use (see page 104).
4 Gear.
5 Rev counter (see page 107).
6 Clock.
This can be set using the “Date and Time” function in the Menu (page 204).
7 Lap, only available in Track Info Mode (see page 121).
100
To Next Page
Loading...
