Menu - Riding Mode - EBC
The Engine Braking Control (EBC) system controls
engine braking when riding with control
completely closed (both when and in a
normal with the same gear engaged, while
braking or not). This system independently adjusts
the valves to ensure a consistent torque
goes back from the wheel to engine during these
stages.
The system allows the rider to set "engine brake”, the
range being from a maximum engine braking with
system set to 1 and progressively decreasing as level
increases.
System is sensitive at high rpm and
sensitivity gradually decreases as soon as engine
rpm decrease.
EBC
DQS
Info Mode
DAVC
ABS
1
32
Fig 119
Fig 120
180
To Next Page
Loading...
