Ducati PANIGALE V45 2021 - Light Control

Light control
Low / High beam
At Key-On, the high beam and low beam lights are
 only the parking lights are turned on.
When the engine is  the low beam is
automatically switched on. It is possible to switch
from low to high beam and vice versa with  (1),
positions (A) and (B), or flash by pressing  (1) in
position (C). If engine is not   turning the
key to on, it is  possible to switch on the
lights or flash.
If within 60 seconds from the manual switching on of
the low or high beam the engine is not  the
lights are turned 
To preserve the motorcycle  if when 
the engine the high/low beams are on, the headlight
is automatically switched  and then on again
when the engine is 
1
C
A
B
2
3
Fig 36
63