Type: Stylema monobloc
(R)
M4.30, radial mount
(ABS Cornering EVO).
Number of pistons per calliper: 4
Friction material: BRM10H.
Master cylinder type: PR16/21 S, self-bleeding.
Front brake master cylinder lever DBC: 21 mm (0.83
in).
Front brake master cylinder diameter: 16 mm (0.63
in).
REAR
With fixed drilled stainless steel disc.
Disc diameter: 245 mm (9.6 in).
Brake disc thickness: 5 mm (0.2 in).
Disc thickness maximum wear: 4.5 mm (0.18 in).
Braking 219 sq.
cm (33.94 in
2
).
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO.
Number of pistons per calliper: 2.
Cornering ABS EVO.
Friction material: TOSHIBA TT 2172 HH.
Master cylinder type: PS 13.
Master cylinder piston diameter: 13 mm (0.51 in).
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the area with abundant running water.
Transmission
Hydraulically-controlled slipper/self-servo wet
multiplate clutch controlled by the lever on
side of the handlebar.
Drive is from engine to gearbox primary
via spur gears.
Primary drive: 30/54.
Drive ratio: 1.80:1.
6-gear gearbox with Ducati Quick (DQS) up/
down EVO2, gear change pedal on side of
motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
16/41
Total gear ratios:
1
st
36/15
2
nd
34/17
3
rd
33/19
4
th
32/21
5
th
30/22
283
To Next Page
Loading...
