Menu - Riding Mode - DES
This function allows selecting the control type of the
electronic suspensions of each riding mode.
This system communicates with the Bosch
to dynamically respond to changing road
and riding conditions, thereby ensuring the best
possible damping and total control of
the motorcycle. It features two operating modes:
Fixed, which is not an active mode and allows the
rider to set specific compression and rebound
for the front and rear suspensions (as well as
the steering damper preload). These are
maintained steady by the system until rider changes
them, as it happens on a suspension system with
standard adjustment. As an alternative, system
features the Event Based mode, which is semi-active
and allows the rider to select suspension "behaviour"
levels, from hard to In this mode, system
dynamically adjusts compression, rebound and
hardness of the damper depending on riding
conditions, while still keeping to the overall
"behaviour" level previously selected by the rider.
139
To Next Page
Loading...
