Change Riding Mode as follows:
●
Press and hold the MODE/ENTER (3) for
a long time.
System opens the page from which it is possible
to scroll the available Riding Modes and view
their parameters, together with the relevant
●
With (1) and (2) it is possible to select the
desired Riding Mode.
●
Press the MODE/ENTER (3) to confirm.
Select "Exit" and press the MODE/ENTER (3)
to quit the Riding Mode change function without
making any changes.
As soon as the new Riding Mode is confirmed, the
instrument panel checks the following conditions:
●
If speed is lower than or equal to 5 km/h (3 mph)
and control is open, the message “Close
is displayed; the new Riding Mode is
confirmed and stored only when control
is closed and the main screen is displayed.
●
If speed is lower than or equal to 5 km/h (3 mph),
control is closed but brakes are
actuated, the message “Release brakes” is
displayed; the new Riding Mode is confirmed
and stored only when brakes are released and
the main screen is displayed.
●
If both the previously specified conditions are
true, message “Close and release
brakes” is displayed; the new Riding Mode is
confirmed and stored only when the 2
conditions are as required and the main screen is
displayed.
If either of the conditions required to validate the
change of Riding Mode are not true within 5 seconds
from activation of one of the above-described
conditions, the procedure will be the
Fig 63
105
To Next Page
Loading...
