Delta time
In the Track Evo Info Mode, the “Delta time” (H)
function appears below the timer, showing the
comparison (positive or negative) of the recorded
time with the previous LAP.
Every time a LAP is completed:
1) if the delta is negative, it means that the LAP
just recorded is and therefore the delta,
the timer and the LAP number flash for 5
seconds;
2) if the delta is positive, it means that the LAP just
recorded is not and therefore the delta,
the timer and the LAP number flash for 2
seconds and remain steady on for 3 seconds.
Note
The “Delta time” is not displayed during the
recording of the first LAP.
Fig 81
128
To Next Page
Loading...
