If the level set is Dynamic, “Dynamic” is displayed on
the right. If the level set is FIXED, “Fixed” is
displayed on the right.
If no customised levels are present:
●
it is possible to set FIXED management by
selecting “Fixed Suspension” with (1)
and (2) and pressing the ENTER (3).
●
it is possible to set DYNAMIC management by
selecting “Dynamic Suspension” with (1)
and (2) and pressing the ENTER (3).
If customised levels are present:
●
it is possible to set FIXED management with the
default values by selecting “Default Fixed
Suspension” with (1) and (2) and
pressing the ENTER (3).
●
it is possible to set FIXED management with the
customised values by selecting “Fixed
Suspension” with (1) and (2) and
pressing the ENTER (3).
●
it is possible to set DYNAMIC management with
the default values by selecting “Default
Dynamic Suspension” with (1) and (2)
and pressing the ENTER (3).
●
it is possible to set DYNAMIC management with
the customised values by selecting “Dynamic
Suspension” with (1) and (2) and
pressing the ENTER (3).
141
To Next Page
Loading...
