By selecting one of the five menus (Front
Compression, Front Rebound, Rear Compression,
Rear Rebound, Steering Damper), when accessing
the function a list of all the possible customisation
levels is available on the and the current set
level on the right; customisation levels that can be
selected are:
●
number of clicks from 1 to 32 for “Front
Compression”, “Front Rebound”, “Rear
Compression”, “Rear Rebound” menus;
●
number of clicks from 1 to 19 for “Steering
Damper” menu.
The motorbike profile with the highlighted
where you will be acting will also be displayed.
With (1) or (2) select the new level of
intervention desired. For each highlighted level, the
corresponding paired value in the central table
(highlighted with a black arrow
) will be displayed.
Once the desired level is highlighted, press the
ENTER (3) to memorise the new selection.
To exit the menu and return to the previous screen,
select the “Back” item and press the ENTER
(3).
To restore the default values of the FIXED mode,
select "Default" and keep the ENTER (3)
pressed for 2 seconds, then “Back” is automatically
highlighted.
Fig 100
145
To Next Page
Loading...
