By selecting one of the six menus (Brake
Front Fork, Shock Absorber, Steering Damping,
Acceleration, Mid Corner) when you access the
function, all possible customisation levels (from +5
to -5) are listed on the and the currently set level
is shown on the right. The motorbike profile with the
highlighted where you will be acting will also be
displayed.
With (1) and (2) select the new level of
intervention desired. For each highlighted level, the
corresponding paired value in the central table
(highlighted with a black arrow
) will be displayed.
Once the desired level is highlighted, press the
ENTER (3) to memorise the new selection.
To exit the menu and return to the previous screen,
select the “Back” item and press the ENTER
(3).
To restore the default values of the DYNAMIC mode,
select "Default" and keep the ENTER (3)
pressed for 2 seconds, then “Back” is automatically
highlighted.
Fig 103
148
To Next Page
Loading...
