Once the DPL level is set, the instrument panel
shows the wait screen (A) for 2 seconds: during this
time, if you press the ENTER (3), the wait
phase is interrupted and the instrument panel
displays the main screen and sets the DPL to OFF.
The instrument panel then displays the “assisted
screen in mode (B) for Track and Road Info
Modes, in mode (C) in the Track Evo Info Mode (see
page 98).
the assisted the instrument panel sets
the DPL to OFF and shows the main screen again.
The DPL is set to OFF by default by Ducati.
Launch Waiting...
Pull the clutch
Engage 1
st
gear
Open Full Throttle
Exit
Ready
to launch
Gradually
release the clutch
and start
Gear
N
RPM X 1000
A
B
C
Fig 166
223
To Next Page
Loading...
