Music player control enabling
If the music player control is set to “OFF” (Fig 13),
press the ENTER (3) to activate it.
With the music player control active, the display
shows the title of the track currently being played on
the connected (B), together with the
available controls (C), and the “EXIT” indication
preceded by the black arrow facing downwards (D).
Note
The full name of the track is displayed once,
scrolling the characters from right to then only
the first characters are displayed. If the title of the
track is not available, “NOT AVAILABLE” will be
displayed.
Music player controls
When the control is active, (1), (2) and
ENTER (3) are used by the instrument panel
only for the music player controls. In
●
Play/Pause, keep the ENTER (3) pressed
for 2 seconds;
●
Go to next track “SKIP”, press the ENTER
(3);
●
Increase the volume “+”, press (1);
●
Decrease the volume “-”, press (2);
●
Quit the music player control, hold (2)
pressed for 2 seconds.
EXIT
SKIP PLAY
TRACK NAME
STREET
0
11:34
A.M.
RPM X 1000
Gear
km/h
N
DWC 3
DTC 3
DSC 2
LO HI
PLAYER ON
B
C
D
Fig 14
30
To Next Page