Hazard function (4 turn indicators)
The "Hazard" function turns all four turn indicators
on at the same time to signal an emergency
condition. Push the to activate the “Hazard”
function. It can only be activated when vehicle is
turned on (Key-ON). When the "Hazard" function is
active, all four turn indicators blink at the same time
as well as warning lights on the instrument panel.
The “Hazard” function can be manually turned
exclusively when vehicle is on (key-on), by pressing
(3).
Once the "Hazard" function is activated, if vehicle is
turned (key turned to "OFF"), the function stays
active for 2 hours. 2 hours, the turn indicators
switch OFF automatically in order to save
charge.
Note
If user a Key-ON while the "Hazard"
function is still active, the function will remain ON
(temporary turn indicator control interruption is
allowed during the instrument panel initial check
routine).
Note
If there is a sudden interruption in the
while the function is active, the instrument panel will
disable the function when the voltage is restored.
Note
The "Hazard" function has higher priority
compared to normal operation of the single turn
indicators, this means that, as long as it is active, it
will not be possible to activate the single right or
turn indicators.
67
To Next Page
Loading...
