EasyManua.ls Logo

Dulevo 6000 - 1.9.c - INSTRUCTIONS FOR HIGH-PRESSURE WATER SYSTEMS (OPT); 1.10 - MAINTENANCE INSTRUCTIONS

Dulevo 6000
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-1-
16 / 20 2016-11
Effettuare pertanto le operazioni di ricarica solamente in
aree adeguatamente ventilate.
- Non fumare e/o utilizzare amme libere nel raggio di due
metri dalla batteria durante la ricarica o il raffreddamento
della stessa dopo la ricarica.
- Non causare cortocircuiti.
- Non invertire le polarità dei collegamenti ai poli delle
batterie.
- Non appoggiare attrezzi o oggetti metallici sulle batterie:
possono causare cortocircuiti.
- Utilizzare un caricabatteria adeguato alla capacità e alle
caratteristiche della batteria.
- Non spostare la spazzatrice manualemente e non ac-
cenderla per alcuna ragione nel corso della ricarica della
batteria.
1.9.c - NORME PER SISTEMI IDRICI AD ALTA PRESSIO-
NE (OPT)
AVVERTENZA:
L’uso improprio di pompe e sistemi ad alta pressione
nonché l’inosservanza delle norme di installazione e
manutenzione possono causare gravi danni alle persone
e/o alle cose.
I sistemi ad alta pressione possono essere utilizzati
soltanto da personale adeguatamente addestrato.
Prima dell’avviamento del sistema l’operatore è tenuto a
veri care che:
- I tubi ad alta pressione non presentino segni di abrasione
o di danneggiamento.
- Le raccorderie siano in perfetto ordine.
- Nell’area di lavoro non ci siano persone estranee, detriti
o animali.
- Nell’area di lavoro non ci siano oggetti che possano
essere scagliati dal getto ad alta pressione.
AVVERTENZA:
In caso di un qualsiasi malfunzionamento, anomalia o
possibile difetto, l’operatore deve fermare immediata-
mente la pompa, azzerare la pressione ed informare il
proprio responsabile.
1.10 - NORME PER LA
MANUTENZIONE
AVVERTENZA:
- Prima di iniziare le operazioni di pulizia o manuten-
zione sulla macchina o durante la sostituzione di
componenti, arrestare il motore, togliere la chiave
d’accensione e scollegare la batteria.
- Se un intervento di manutenzione richiede l’esclu-
sione, la rimozione o lo smontaggio di qualsiasi di-
spositivo di sicurezza, ripristinare immediatamente la
funzione di tale dispositivo al termine dell’operazione
di manutenzione.
Charging operations must take place only in a well ven-
tilated area.
- Do not smoke or use open ames within a six (6) foot
radius of the battery while it is being charged or while it
is cooling after having been charged.
- Do not cause short circuits.
- Do not invert polarity of battery pole connections.
- Do not rest tools or metal objects on the batteries; danger
of short-circuits.
- Use a battery charger appropriate to the battery’s capacity
and features.
- Do not move the sweeper manually and do not start it
while the battery is charging.
1.9.c - INSTRUCTIONS FOR HIGH-PRESSURE WATER
SYSTEMS (OPT)
WARNING:
Improper use of pumps and high-pressure systems,
as well as non-compliance with the installation and
maintenance instructions, can cause serious damage
to people and/or property.
Only properly trained personnel may use the high pres-
sure system.
Before starting the system, the operator must make sure that:
- The high pressure pipes do not show any sign of abrasion
or damage.
- Fittings are in perfect conditions.
- No bystander, debris or animal are in the work area.
- There is no object that could be thrown by the high pres-
sure jet.
WARNING:
In case of any malfunction, anomaly or possible defects,
the operator must immediately stop the pump, bring the
pressure to zero and inform his supervisor.
1.10 - MAINTENANCE
INSTRUCTIONS
WARNING:
- Before carrying out cleaning or maintenance ope-
rations on the machine, or when replacing machine
parts, turn off the engine, remove the ignition key and
disconnect the battery.
- Should any maintenance task require the disabling,
removal or disassembling of any safety device, that
devise must be immediately restored when the main-
tenance is complete.

Table of Contents

Related product manuals