DuraLabel.com | 800.788.5572
3.3 Using a Parallel Cable | 17
CONNECTING THE PRINTER
D. Select DuraLabel 9000 and click Next on the DuraLabel Driver Selection window
that appears.
E. Choose the install location and click Install
on the Choose Install Location window
that appears. An Installing window shows
installation progress.
F. Select Install printer drivers on the Driver
Wizard window that appears and click Next.
G. Select Graphic Products DuraLabel 9000 on
the Specify Printer Model window that appears
and click Next.
H. Select the LPT1 port on the Specify Port
window that appears and click Next.
I. Select Printer Name, set the printer as default
and choose printer sharing options on the
Specify Printer Name window that opens, then
click Next.
Windows Printer Driver License Agreement
Selecting a DuraLabel Driver
Install Printer Driver Window Specify Printer Model for Driver Installation
Driver Install Location Window
Installation Progress Window
Select port LPT1 when using a parallel
cable to install a driver.
To Next Page
Loading...
