48 | 10.11 Wrinkles Appear on Half of Label
DuraLabel.com | 800.788.5572
TROUBLESHOOTING
SETTING LEFT ADJUSTABLE PRESSURE KNOBS
For wrinkles on the right side of the printed label, set the two left adjustable pressure
knobs.
A. Press down on the far-left adjustable pressure knob while turning it clockwise to
the desired pressure setting.
B. Press down on the adjacent left adjustable pressure knob while turning it
clockwise to the same pressure setting as the far-left pressure knob.
NOTE: You may need to experiment to determine best setting, based on type of label
or sign.
Left adjustable
pressure knobs
Right adjustable
pressure knobs
Ribbon wrinkled on right side
Front of
printer
Label dispensed
this end
To Next Page
Loading...
