Duratech 2009 - Introduction; Purpose

2
2009 DURATECH TUB GRINDER OPERATING INSTRUCTIONS
Introduction
This Industrial Grinder is designed to grind wood waste and other materials, including grass clippings, leaves, pallets,
construction and demolition debris, tree branches and tree trunks It is NOT designed to grind rocks, steel, concrete, or
the like.
Purpose
The purpose of this owner’s manual is to explain maintenance requirements, safety, and routine adjustments for the
most efcient operation of your 2009 DuraTech Tub Grinder . There is also a trouble shooting section that may help in
case of problems in the eld. Any information not covered in this manual may be obtained from your dealer.
SPECIAL NOTE: When reference is made as to front, rear, left hand, or right hand of
this machine, the reference is always made from standing at the rear end of the machine
and looking toward the hitch. Always use serial number and model number when referring
to parts or problems. Please obtain your serial number and write it below for your future
reference.
MODEL: 2009 DuraTech Tub Grinder SERIAL NO. ______________________
How to use this manual
Manual organization
This manual is organized into the following parts:
• Manual 1: Operating instructions explain how to set up, use and maintain the 2009 DuraTech Tub
Grinder.
• Manual 2: Parts reference contains diagrams of each assembly with the number of each part identied.
A key on the facing page contains a description of the part and the quantity used.