Duratech 2009 - Other Controls

26
2009 DURATECH TUB GRINDER OPERATING INSTRUCTIONS
2.11 Other controls
Radio remote control unit (optional)
The optional radio remote control unit allows the operator to remotely start and stop the tub, change the tub’s direction
of rotation to forward or reverse, perform an emergency stop, and raise and lower the conveyor.
NOTE: See also section 3.17, “Operating the grinder using the remote radio option.”
Battery disconnect switch
The battery disconnect switch is used to connect and disconnect the main battery cable to the machine. When the
machine is not in use, it should be disconnected.
battery disconnect switch
( REV. 09-17 )