64
2009 DURATECH TUB GRINDER OPERATING INSTRUCTIONS
CAUTION: Care must be exercised when lubricating the camshaft bushings and anchor pins.
Over lubrication could cause a safety problem as brake linings become saturated with lubricants.
NOTE: When reline shoe linings become saturated with grease, replace with new shoe and
lining assemblies.
5.9 Brake component lubrication
A schedule for the periodic lubrication of brake components should be established by the operator on the basis of past
experience and the severity of operating conditions.
GUIDELINES
• For camshaft roller journals: Lubricate with high temperature anti‑seize grease.
• For anchor pins: Lubricate with high temperature anti‑seize grease.
• For manual slack adjusters: Lubricate with NLGI Grade 2.
• For automatic slack adjusters: Lubricate with ASA manufacturer’s recommended lubricant.
( REV. 08-04 )
camshaft bushings zerks
slack adjuster zerk
To Next Page
Loading...