65
2009 DURATECH TUB GRINDER OPERATING INSTRUCTIONS
FREQUENCY OF SERVICE
Camshaft roller journals, anchor pins, slack adjusters every 25,000 to 30,000 miles or every six months depending
on severity of operating conditions. (For off highway use: service every 4 months depending on severity of operating
conditions
SUGGESTED PREVENTATIVE MAINTENANCE
• Every 1,000 miles: Check oil level in wheel hub and inspect wheel for leaks.
• Every 15,000 miles: Check brake adjustment. Repack wheel bearings (grease application).
• Every 25,000 to 30,000 miles: Check lining wear and estimate reline time. Inspect camshaft, camshaft
spider bushing and camshaft support bracket bushing for any signs of wear. Lubricate brake actuating
components.
• Every 100,000 miles, once a year, or at brake reline: Replace wheel bearing lubricating oil (if
applicable). Check brake air chambers and slack adjusters. Inspect brake rollers, roller shafts, anchor
pins and bushings and replace if necessary.
To Next Page
Loading...