108
2009 DURATECH TUB GRINDER OPERATING INSTRUCTIONS
3. Then press the start button for the main electrical motor (labeled ‘ROTOR’). The start button can be
found in two different places, on the control panel marked rotor or on the large soft start panel.
Start button ROTOR
Large soft start panel
start button
4. Then press the start button for the electrical motor that runs the hydraulic pump. This can also be found
in two different places, on the control panel marked ‘HYDRAULICS’ or on the smaller soft start panel for
the 75 Hp motor.
Start button HYDRAULICS
Small soft start panel
start button
Note: Electric motor will not start if platform is raised.
To Next Page
Loading...