Maintenance Manual (960-949) 3-7
Tests and Diagnostics
To return to the Top menu, move the cursor to EXIT to TOP Menu on the
screen above and press ENTER.
Others are the diagnostic tests. Move the cursor on the test item you want
to execute and press ENTER.
The following table shows the subtests names of each test.
If you want to stop the test program under running temporarily, press
SHIFT + Q.
After the stop, pressing C continues the test and pressing E ends the test.
TEST
NO.
TEST
NAME
SUBTEST
No.
SUBTEST NAME
1 MEMORY 1 Main Memory Test
2 HDD/SSD
Tes t
1
2
3
4
5
Sequential Read Test
Partial Read Test
Address Jump Test
Address Uniqueness Test
Specify Address Test
3 Keyboard Test 1
2
Key-code Test
Touch Pad Test
4 LCD Panel
Tes t
1
2
3
4
LCD Panel Test
All dot on/off for LCD
H - pattern display
LCD brightness
5 Battery
Charge Test
- -
To Next Page
Loading...
