Maintenance Manual (960-949) 4-16
Replacement Procedures
4.15.2 Installing the System board
To install the system board, follow the steps below.
1. Set the system board in place.
2. Secure the system board with the screws.
3. Connect the Keyboard FPC, Click Pad FFC, Keyboard Backlight
FPC, Speaker harness, Fingerprint FPC to the System Board.
4. Connect the Wireless LAN antenna cable to the connectors on the
Wireless LAN card (black cable from “AUX or “2” and white cable from
“Main” or “1”).
To Next Page
Loading...
