10 of 105
4 GSC400 Series Installation and Wiring
4.1 Safety Information
Generator systems contain high voltage circuits. Working on powered equipment can
cause damage to equipment, injury, or death. The following symbols will be used in this
document to classify information:
The following general safety precautions should be headed:
1. The GSC400 may carry high Voltage/Current which can cause serious injury or
death. Extreme caution must be exercised when connections are being installed to
or from the controller. All wiring connections must be de-energized before any
installations are performed. Wiring of the GSC400 should be performed by
qualified electricians only.
2. AC power may carry high Voltage/Current which can cause serious injury or
death. De-energize all AC power sources before any connections are performed.
3.
NEVER energize AC power with AC current sensing connector unplugged. An
energized, unplugged connector could result in severe injury or death. Never
unplug an energized connector.
Caution: This is used to indicate something that
you should take special notice of but that is not
normally a threat to safety.
Danger: This is used to indicate a potential for
injury or death.
Danger – High Voltage: This is similar to Danger
above but relates specifically to conditions where
high voltage is encountered.
To Next Page
Loading...
Need help?
General
