11 of 105
4.2 Mounting Location:
The GSC400 gen-set controller must be
properly mounted for safe operation. Caution
must be taken at the installation site to make
sure the site is free from excessive moisture,
fluctuating temperatures, dust, corrosive
aterials etc. The controller should be safely
e mounting locations.
m
mounted in a secure location using the 3
mounting screws provided. See Figure 2 for
th
Caution: Mounting screws must be installed at
the recommended torque of 10 inch pounds.
Figure 2 – GSC400 Mounting Locations
To Next Page
Loading...
Need help?
General
