Dynon SkyView Classic - Page 245

Messages and Alerts
SkyView Classic Pilot’s User Guide – Revision Z 12-8
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
Description
“Caution”
ZAON OFFLINE
The connected Zaon traffic receiver
has not replied to a status query in
the last 10 seconds.
“Caution”
FLARM OFFLINE
The connected FLARM traffic receiver
has not replied to a status query in
the last 3 seconds.
“Caution”
COM RADIO PANL
OFFLINE
The COM radio control panel is no
longer communicating with SkyView.
“Caution”
COM XCEIVER
OFFLINE
The COM radio transceiver module Is
no longer communicating with
SkyView.
“Caution”
AP PANEL OFFLINE
The Autopilot Control Panel is no
longer communicating with SkyView.
“Caution”
KNOB PANEL OFFLINE
The Knob Control Panel is no longer
communicating with SkyView.
“Caution”
BATTERY
MISSING/FAULT
A previously connected backup
battery is no longer detected or has
failed.
“Caution”
CROSS CHECK
ATTITUDE
While in flight, IAS has become
invalid (likely due to icing or
obstruction), and all GPS sources
have failed. The attitude indication
should be considered unreliable.
“Caution”
TOUCH PANEL FAULT
Touch Hardware is currently offline.
“Caution”
NO HI-RES TERRAIN
SkyView has detected that there is no
high resolution terrain database
installed for the aircraft’s current
position.
“Caution”
CPU TEMP CRITICAL
The display internal temperature is
high. To prevent permanent damage,
the display may shut down at any
time unless immediate action is
taken to cool it down.
“Caution”
ROTAX: LIMIT FLIGHT
OP
The ROTAX engine has informed
SkyView there is a problem with the
engine.
“Caution”
ROTAX: LAND
AIRCRAFT
The ROTAX engine has informed the
SkyView EMS-221 there is a
significant problem with the engine.