2 Eaton 9355 Parallel UPS (10/15 kVA) User's Guide 164201601—Rev E0
• ABM
®
technology that uses advanced battery management to increase battery service life, optimize
recharge time, and provide a warning before the end of useful battery life.
• Up to three hours of extended runtime with added EBMs.
• Advanced power management with the Software Suite CD for graceful shutdowns and power monitoring.
• Emergency shutdown control through the remote emergency power-off (REPO) port.
• Start-on-battery capability for powering up the UPS even if utility power is not available.
• Standard communication options with a DB-9 serial port, relay output contacts, and programmable signal
inputs.
• Optional X-Slot
®
cards with enhanced communication capabilities for increased power protection and
control.
For further details on available options, see Eaton 9355 UPS 10/15 kVA User’s Guide.
11..11 UUssiinngg TThhiiss MMaannuuaall
This manual describes how to install and operate the Eaton 9355 UPS. Read and understand the procedures
described in this manual to ensure trouble-free installation and operation. In particular, be thoroughly familiar
with the REPO procedure or the LOAD OFF procedure, see Chapter 6 UPS Operating Instructions.
The information in this manual is divided into sections and chapters. The system, options, and accessories
being installed dictate which parts of this manual should be read. At a minimum, Chapter 1 Introduction
through Chapter 4 UPS System Installation and Chapter 6 UPS Operating Instructions should be
examined.
Read through each procedure before beginning the work. Perform only those procedures that apply to the UPS
system being installed or operated.
11..22 CCoonnvveennttiioonnss UUsseedd iinn TThhiiss MMaannuuaall
This manual uses these type conventions:
• Bold type highlights important concepts in discussions, key terms in procedures, and menu options, or
represents a command or option that you type or enter at a prompt.
• Italic type highlights notes and new terms where they are defined.
• Screen type represents information that appears on the screen or LCD.
Icon
Description
Note Information notes call attention to important features or instructions.
[Keys] Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].
In this manual, the term UPS refers only to the UPS cabinet and its internal elements. The term UPS system
refers to the entire power protection system – the UPS cabinet, an external battery system, and options or
accessories installed.
The term line-up-and-match refers to accessory cabinets that are physically located adjacent to the UPS. The
term standalone refers to accessory cabinets that are located separate from the UPS.
Left and right side notations are referenced standing in front of the cabinet.
Introduction
To Next Page
Loading...
