Installation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 20
Figure 16. Reversing the Mounting Button
5. Push down to secure the ePDU in position (see Figure 17).
6. Continue to “Grounding the ePDU” on page 28 if you are installing a ground screw and grounding cable.
Otherwise, go to “Network and Environmental Ports” on page 29.
Figure 17. Securing the ePDU
NOTE The ePDU will fit tight and it may require minor force to engage in the slot. This is a
friction fit to hold the ePDU in the slot.
2.5 mm
2.1 mm
2.5 mm
2.1 m
To Next Page
Loading...
