Eaton ePDU G3 - Page 73

LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 5 64
Figure 71. Example Daisy Chain Device ePDU Setup (Device)
From the LCD of the Host ePDU, set the values as follows (see Figure 72):
1. On the Settings menu, scroll up or down to highlight Daisy Chain and press ENTER.
2. Scroll up or down to highlight Settings and press ENTER.
3. Select 0 (Host) from the Id: selection drop-list. Press ENTER.
4. Select End or Middle from the Place: selection drop-list. Press ENTER.
5. Press ESC to return to the previous menu.
Figure 72. Example Daisy Chain Host ePDU Setup (Host)
Id:
Place
0 (Host)
1 (Device)
0 (Host)
1 (Device)
(Device)
(Device)
2
3
Id:
Place:
1 (Device)
Middle
Middle
End
LCD
Daisy Chain
Daisy Chain
Daisy Chain
Display
Daisy Chain
IPv
4
Factory
Settings
Daisy Chain
Settings
Enter
ESC
Enter
Enter
Enter
ESC
Language
(Device)
(Device)
(Device)
(Device)
4
5
6
7
Id:
Place:
Middle
Middle
End
Daisy Chain
Enter
Host0
Id:
Place:
1 (Device)
0 (Host)
0
(
Host
)
End
()
LCD
Daisy Chain
Daisy Chain
Display
Daisy Chain
IPv4
Factory
Discovery
Settings
Daisy Chain
Settings
ESC
Enter
Enter
()
Enter
ESC
Language