Eaton PowerXL DA1 - 3.3.3 Fixing; 3.3.3.1 Fixing with screws

3 Installation
3.3 Mount ing
DA1 Variable Frequency Drives 11/16 MN04020005Z-EN www.eaton.com 73
3.3.1 Mounting position
DA1 series variable frequency drives are designed to be mounted vertically.
The maximum permissible inclination is 30°.
Figure 37:Mounting position
3.3.2 Cooling measures
In order to guarantee sufficient air circulation, enough thermal clearance
must be ensured according to the frame size (rating) of the frequency
inverter.
Figure 38:Clearances for air cooling (left: IP20; right: IP66)
≦ 30º
≦ 30º
≦ 30º
≦ 30º
￫
The variable frequency drives can be mounted side by side
without any lateral clearance between them.
b
c
a
c
a
L2/N L3DC-

L1/L


DC+ BR U V W
12345678910111213
14 15 16 17 18
COM
L2/N L3DC- L1/L
DC+ BR U V W
12345678910111213
14 15 16 17 18
COM
c
a
c
b
a
REV FWD
0
ON
OFF
PWR