Eaton XV300 Series - Page 64

5. External connections
5.8 XV300 Touch Panel as a SmartWire-DT® coordinator
Config-LED
Indicates whether the SWD master project configuration defined in the PLC matches
the SWD network target configuration stored in the XV300.

Health Description
 off
• No project configuration present.
• Incorrect target configuration (see LED
SWD).
 Redcontinuouslight
The project configuration and the stored
target configuration are not compatible
with each other.
 Greenflashing
The project configuration is compatible
with the stored target configuration.
 Greencontinuouslight
The project configuration matches the
stored target configuration
Table 25: Config-LED
64
XV30012/15 MN048017 ENwww.eaton.eu