EBARA EV-S50 - Setting the Pump Running Mode; Setting the Rotational Speed in the Normal Mode

P.64
5.3.3 Setting the pump running mode
S.ENERGY MODE: Enables the energy-saving operation
NORMAL MODE: Enables the rated operation.
The mode which is currently not set is displayed.
If you do not need to set, press the key
PRG. to go back to the previous screen.
5.3.4 Setting the rotational speed in the Normal mode
Use the up and down arrow keys to change the setting value.
▲: Increase the setting speed by 0.1 kmin
-1
.
▼: Decrease the setting speed by 0.1 kmin
-1
Upper limit MP/BP: The value lower than the set value for the rated speed
Lower limit MP/BP: 4.0 kmin
-1
▲
▼
SET
RUNNING MODE?
PRG.
PRG.
ENTER
ENTER
ENTER
NORMAL MODE?
S.ENERGY MODE?
Setting done
Setting done
NORMAL SPEED
MP #
．
# kmin
-1
SET
NORMAL SPEED?
PRG.
ENTE
ENTE
SET MP
NORMAL SPEED?
Setting
done
ENTE
Use the keys, ”▲” and ”▼” to set.
▽
△
NORMAL SPEED
BP #
．
# kmin
-1
ENTE
SET BP
NORMAL SPEED?
Setting
done
ENTE
Use the keys, ”▲” and ”▼” to set.
PM10U
EBARA
CORPORATION