SMS - Anny Way
This entry screen is used to define where an alarm is signalled by SMS in the event of a fault.
The screen contains the following parameters:
SMS alarm signalling - Anny Way Input Default
SMS - Anny Way
Description Description of the remote station for the
SMS, e.g. SMS
max. 19 characters SMS
Telephone number Enter telephone number of the remote station
(e.g. that of the on-call technician)
-
Priority Messages with this priority will be
transmitted.
None1, 2, 1 + 2 None
Time range Messages are never, within, outside or
always transmitted in the time range.
Never, Within, Outside, Always Never
For SMS Text Message Transmission, the telephone numbers of the SMS providers must be activated
in the telephone system otherwise no SMS text message transmission is possible: The following
numbers are stored in the system centre and must be checked at the provider for their validity:
D1:0171-25 21 002Anny Way:0900-32 66 90 02 Source: MATERNAs Anny Way SMS-Dienst, http://
www.sms-im-festnetz.de/sms/
An alternative destination with a different telephone number and a different provider should always be
used for every destination! It is not ensured after successful transmission of any message to the
provider that this reaches the recipient promptly or at all. For this reason, alarm signalling only by SMS
should not be used and another separate alarm path should be implemented.