Eclipse AVN5510 - Switching the Map Reduction Scale; Switching to the Desired Reduction Scale

31
Basic
operation
Switching the map reduction scale
The map reduction scale (map range) can be switched to any desired setting from
40,960,000:1 to 2,500:1. Also, if the destination is set, you can switch to the reduction scale
showing the entire route to the destination with one touch.
To widen the map's range, touch
. To shrink it down, touch .
• Every time the touch switch is touched,
the scale goes up/down one level at a
time.
• After having touched or , touch
a number on the scale bar to switch to
the reduction scale represented by
that number.
• Touch continuously on or for at
least 1 second to switch the scale with no increments (free zoom).
• The reduction scale switched to will be indicated with a yellow mark.
City
map
Switching to the desired reduction scale
Scale bar
• The switch will disappear when setting to the maximum range (250 mile
scale diagram).
• For safety reasons, the scale cannot be free zoomed while driving.