Ecolab Elados EMP II-E10 User Manual

417101339_EMP_II_E10
33
Rev. 10-01.19
1 General
This operating instructions contains all necessary instructions for installation, start-up,
maintenance and repair of ELADOS
®
EMP II electrical motor-driven metering pumps.
NOTE
The German sections of this manual constitute the ORIGINAL OPERATING MANUAL and take
legal precedence.
All other languages are translations of the ORIGINAL OPERATING MANUAL.
If you have questions, please contact us as outlined in chapter 1.4 “Contact Address /
Manufacturer”.
1.1 EBS Article numbers
Within this operating instruction article numbers, and EBS numbers are represented. EBS
numbers are Ecolab internal article numbers and used only “concern internal”.
1.2 Transport damage
CAUTION
If the Pump is found to have been damaged when it is unpacked, it should not be installed!
ATTENTION
1.3 Warranty coverage
Operational safety, reliability and performance of this model are only guaranteed by the
manufacturer if the following conditions are met:
• Mounting, connections, adjustment, service and repair are performed by authorized and
trained personnel.
• The diaphragm metering pump must be used according to the specifications in this operating
instructions contained in the delivery scope.
• Only original spare parts must be used for repairs.
• The warranty claim is invalidated if the pump housing is opened.
In addition, the general warranty and service conditions of the company
Ecolab Engineering GmbH are applicable.
1.4 Contact address / Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83309 Siegsdorf
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 2 35
eMail: engineering-mailbox@ecolab.com

Ecolab Elados EMP II-E10 Specifications

General

Brand	Ecolab
Model	Elados EMP II-E10
Category	Water Pump
Language	English