Chapter 24
| Multicast Filtering Commands
MLD Snooping
– 703 –
ipv6 mld snooping This command enables MLD Snooping globally on the switch. Use the no form to
disable MLD Snooping.
Syntax
[no] ipv6 mld snooping
Default Setting
Disabled
Command Mode
Global Configuration
Example
The following example enables MLD Snooping:
Console(config)#ipv6 mld snooping
Console(config)#
ipv6 mld snooping
proxy-reporting
This command enables MLD Snooping with Proxy Reporting. Use the no form to
restore the default setting.
Syntax
[no] ipv6 mld snooping proxy-reporting
Default Setting
Disabled
Command Mode
Global Configuration
clear ipv6 mld snooping
statistics
Clears MLD snooping statistics PE
show ipv6 mld snooping Displays MLD Snooping configuration PE
show ipv6 mld snooping
group
Displays the learned groups PE
show ipv6 mld snooping
group source-list
Displays the learned groups and corresponding source list PE
show ipv6 mld snooping
mrouter
Displays the information of multicast router ports PE
show ipv6 mld snooping
statistics
Shows IGMP snooping protocol statistics for the specified
interface
PE
Table 131: MLD Snooping Commands (Continued)
Command Function Mode
To Next Page
Loading...
Need help?
General