Edge-Core ECS4620-28P - Page 866

Chapter 27 | OAM Commands
– 866 –
clear efm oam
counters
This command clears statistical counters for various OAMPDU message types.
Syntax
clear efm oam counters [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number or list of ports. To enter a list, separate
nonconsecutive port identifiers with a comma and no spaces; use a
hyphen to designate a range of ports. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#clear efm oam counters
Console#
Related Commands
show efm oam counters interface (869)
clear efm oam
event-log
This command clears all entries from the OAM event log for the specified port.
Syntax
clear efm oam event-log [interface-list]
unit - Unit identifier. (Range: 1-8)
port - Port number or list of ports. To enter a list, separate nonconsecutive
port identifiers with a comma and no spaces; use a hyphen to designate a
range of ports. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#clear efm oam event-log
Console#