Edge ED-DVR12004 - 7.3.3.3 Record

115
7.3.3.3 Record
Record control interface is shown as in X474H474H474HFigure 7-46X.
Figure 7-46
Please refer to the following sheet for detailed information.
Parameter
Function
Auto
System enables auto record function as you set in record schedule
setup.
Manual
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop
Stop current channel record no matter what period applied in the
record setup.
Operation here is the same to chapter 4.2 Manual Record. Please refer to chapter 4.2 for detailed
information.