Refresh
You can use button to refresh camera list.
Start Dialogue
You can click this button to enable audio talk. Click 【▼】 to select bidirectional talk mode. There are
two options: DEFAULT/G711a.
Please note, the audio input port from the device to the client-end is using the first channel audio input
port. During the bidirectional talk process, system will not encode the audio data from the 1-channel.
Local Play
The Web can playback the saved (Extension name is dav) files in the PC-end.
Click local play button, system pops up the following interface for you to select local play file. See
X436H436H436HFigure 7-10.X
Figure 7-10
7.2.2 PTZ
The ED-DVR12004 product does not PTZ function.
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter
7.3.2 Setting-> Pan/Tilt/Zoom).
Click PTZ button, the interface is shown as in X437H437H437HFigure 7-11X.
To Next Page
Loading...
