Eldes ESIM364 - 3. MASTER AND USER CODES; 3.1. Managing User and Master Codes

11
11
EN
ESIM364 USER MANUAL V1.6
3. MASTER AND USER CODES
The system supports up to 30 numeric codes, identied as Master code and User code 2 through 30, allowing to carry out system arming/
disarming as well as minor system conguration and control by the keypad.
Master code is authorized to carry out the following:
• Arm/disarm partition.
• Bypass violated zones.
• View violated zones and tampers.
• View system faults.
• Set system date and time.
• View temperature sensor information.
• View event log.
• View and clear alarm log.
• Set/delete user codes.
• Turn ON/OFF electrical appliance.
• Set an existing user code as Duress code.
• Set an existing user code as SGS code.
User code is authorized to carry out the following:
• Arm/disarm partition.
• Bypass violated zones.
• View violated zones and tampers.
• View system faults.
• Set system date and time.
• View temperature sensor information.
• View and clear alarm log.
3.1. Managing User and Master Codes
By default, only master code is listed as 1111 and assigned to Partition 1, 2, 3 and 4. For more details regarding user and master code
partition management, please refer to 3.3. Assigning User and Master Code Partition.
1. To set a new master code:
EKB2
Enter an existing master code, navigate through the following path using OK and arrow keys and enter a new master code:
OK → vvvv → OK → CODES→ OK → MASTER CODE → OK → CODE → OK → mmmm → OK
Value: vvvv – 4-digit existing master code, range – [0000... 9999]; mmmm – 4-digit new master code, range – [0000...
9999].
EKB3/
EKB3W
Press ,
0
, enter and existing master code and a new master code:
0
vvvv
0
1
mmmm
Value: vvvv – 4-digit existing master code; mmmm - 4-digit new master code; range - [0000... 9999].
Example:
1 11 1 1
0 0
2 2 2 2
2. To add a user code:
EKB2
Enter the master code, navigate through the following path using OK and arrow keys and enter a user code:
User code 2... 16: OK → mmmm → OK → CODES → OK → USER CODE (2-16) → OK → USER CODE 2... 16 → OK → CODE → OK →
uuuu → OK
User code 17... 30: OK → mmmm → OK → CODES → OK → USER CODE (17-30) → OK → USER CODE 17... 30 → OK → CODE →
OK → uuuu → OK
Value: mmmm – 4-digit master code; uuuu – 4-digit user code, range – [0000... 9999].
EKB3/
EKB3W
Press ,
0
, enter the master code, user code slot and a user code:
0
mmmm us uuuuu
Value: mmmm - 4-digit master code; us - user code slot, range - [02... 30]; uuuu - 4-digit user code, range - [0000... 9999].
Example:
1 1 1 1
0 0
2
9
5 5
6
3. To delete an existing user code:
EKB2
Enter the master code, navigate through the following path using OK and arrow keys and enter the user code you wish to delete:
OK → mmmm → OK → CODES → OK → REMOVE CODE → OK → uuuu → OK
Value: mmmm – 4-digit master code; uuuu – 4-digit user code.
EKB3/
EKB3W
Press ,
0
, enter the master code and the user code slot you wish to delete:
0
mmmm us
Value: mmmm - 4-digit master code; us - user code slot, range - [02... 30].
Example:
1 1 1 1
0 0
9