7. ALARM INDICATIONS AND NOTIFICATIONS FOR USER. VIEWING VIOLATED ZONES AND TAMPERS
By default conguration, the system makes a phone call to User 1 in case of alarm. By answering the call, the user is able to listen
on his/her mobile phone to what is happening in the area surrounding ESIM364 unit. This feature is provided by a microphone
(if any) connected to ESIM364. The system will attempt to dial the rst user phone number (presumably User 1) assigned to the
partition that has been violated. The system will move to the next listed user (presumably to User 2) in the priority order in case
the previous user was unavailable (out of GSM coverage, busy or did not answer the call). This routine will be continued until one
of the listed users is a available, but will not return to the rst user if none of the users were available. In addition, the system will
not make a phone call to the next listed user in a row if the previous user was available, but rejected the phone call. The phone
calls will cease to be made to the user as soon as the system is disarmed.
User
ESIM364
SMS
12
NOTE: Your alarm system installer may have congured the system to ring the next available user even if the previous one was unavail-
able.
SMS
By, default conguration the system sends an SMS text message containing violated zone or tamper number in case of alarm.
The SMS text message can also contain a text regarding wireless signal loss from a certain wireless device (if any) in case the
tamper violation is caused due to wireless connection loss between ESIM364 and a wireless device. The system will attempt to
deliver the SMS text message in the priority order starting with the rst user (presumably User 1) assigned to the partition that
has been violated. In case of failure to deliver the SMS text message, the system will attempt to send it to the next listed user
(presumably User 2) in the priority order if the previous one was unavailable (the system did not receive a successful SMS text
message delivery conrmation within 45 seconds from the recipient). This routine will be continued until one of the listed users
is available, but will not return to the rst user if none of the users were available. The SMS text messages will cease to be sent to
the user phone number as soon as the system is disarmed.
User
ESIM364
SMS
13
See also 9. VIEWING SYSTEM INFORMATION.
NOTE: Your alarm system installer may have congured the system to send the SMS text message to the next available user even if the
previous one has received it.
EKB2
The built-in EKB2 buzzer and ESIM364 buzzer (if any) provide short beeps continuously in case of alarm. In addition, the LCD
screen back-light level will be boosted and the icon will be displayed in the home screen view of EKB2 keypad next to the
violated partition name. The buzzer can be silenced by disarming the system using any method. Navigate through the following
menu path using OK and arrow keys to view the violated zone or tamper number:
Menu path:
View violated zone: OK → uumm → OK → VIOLATED ZONES → OK → ZONE 1... 76
View violated tamper: OK → uumm → OK → VIOLATED TAMPERS → OK → TAMPER 1... 76
Value: uumm – 4-digit user or master code.
EKB3/
EKB3W
The built-in EKB3/EKB3W buzzer emits short beeps continuously and ESIM364 buzzer (if any) emits a steady beep in case of
alarm. In addition, the violated zone number is indicated by illuminated zone LED or ashing indicator (if the violated zone
number is above 12). The violated tamper number is indicated by illuminated indicator . The buzzer can be silenced by disarm-
ing the system using any method. When EKB3 keypad is operating in 4-partition mode, in case of violated zone/tamper
4
1
key will ash corresponding the alarmed partition number. For more details on EKB3/EKB3W violated high-numbered zone and
tamper number indication, please refer to 13. INDICATION OF SYSTEM FAULTS.
By default conguration, the siren/bell (if any) provides continuous alarm sound for 1 minute in case of alarm. The re alarm
is indicated by pulsating siren/bell alarm sound. The alarm sound can be silenced by disarming the system using any method.
To Next Page
Loading...
