Technical Support - MDM 15/97 599 76 11-68 Rev. 01
- Incorrect choice:
Displayed by the message “Err”, when a function that is not
compatible with the chosen programme is selected.
The display duration is two seconds.
- Alarm code:
Alarm code indicates an error in the appliance operation, the
START/PAUSE sensor flashes when the code is displayed.
- Door closed:
It lights up when the safety device prevents the door opening and
switches off when it can be opened.
It flashes when the device is about to unlock the door (with door
interlock with PTC, which needs one or two minutes to open).
- Time manager:
Represented by four segments positioned above the digits.
(See para. 3.4 Time manager page 17)
- Wash phase:
It lights up during the washing phase.
- Rinse phase:
It lights up during the rinse phase.
- Spin phase:
It lights up during the drainage phase before and during the final spin.
To Next Page
Loading...
