Technical Support - MDM 39/97 599 76 11-68 Rev. 01
Easy-iron
In COTTON programmes:
- adds three rinse cycles
- eliminates intermediate spin cycles
- performs a pulse spin phase before the final spin
- adds an “untangling” phase after the spin cycle
In SYNTHETIC FABRICS programmes:
- it reduces the heating temperature in 50/60°C cycles to 40°C
- increases the wash time
- prolongs the cooling phase at the end of the wash phase
- adds one rinse cycle
- adds an “untangling” phase after the pulse spin cycle
To Next Page
Loading...
