Electrolux R134A - Installation; Harness

4-6
4-64-6
4-6
Installation ProcedureInstallation Procedure
Installation ProcedureInstallation Procedure
Installation Procedure
1. Start with arm in "down" position.
2. Follow steps 1, 2, and 3.
Into bushingInto bushing
Into bushingInto bushing
Into bushing
Shut-off armShut-off arm
Shut-off armShut-off arm
Shut-off arm
FlangeFlange
FlangeFlange
Flange
Down Down
Down Down
Down
positionposition
positionposition
position
3. Arm should be inside3. Arm should be inside
3. Arm should be inside3. Arm should be inside
3. Arm should be inside
edge of housing edge of housing
edge of housing edge of housing
edge of housing
Fill cupFill cup
Fill cupFill cup
Fill cup
HARNESSHARNESS
HARNESSHARNESS
HARNESS
To remove the wiring harness, depress the
retaining tab and pull the plug free.
DepressDepress
DepressDepress
Depress
NotchNotch
NotchNotch
Notch
2.2.
2.2.
2.
Push arm Push arm
Push arm Push arm
Push arm
through fill cupthrough fill cup
through fill cupthrough fill cup
through fill cup
flange hole pastflange hole past
flange hole pastflange hole past
flange hole past
notchnotch
notchnotch
notch
1. Push arm into center1. Push arm into center
1. Push arm into center1. Push arm into center
1. Push arm into center
slot in white bushing slot in white bushing
slot in white bushing slot in white bushing
slot in white bushing
- bottom out- bottom out
- bottom out- bottom out
- bottom out
INSTINST
INSTINST
INST
ALLAALLA
ALLAALLA
ALLA
TIONTION
TIONTION
TION