Electrolux R134A - Removing & Replacing Fill Cup

4-7
4-74-7
4-7
LEVELING ICE MAKERLEVELING ICE MAKER
LEVELING ICE MAKERLEVELING ICE MAKER
LEVELING ICE MAKER
(Ensures uniform ice crescents)(Ensures uniform ice crescents)
(Ensures uniform ice crescents)(Ensures uniform ice crescents)
(Ensures uniform ice crescents)
To remove fill cup, you must separate mold
and blade from module housing. Remove
blade from fill cup.
Hex Hex
Hex Hex
Hex
1/4" Screw1/4" Screw
1/4" Screw1/4" Screw
1/4" Screw
MountingMounting
MountingMounting
Mounting
Screw Screw
Screw Screw
Screw
REMOVING & REPLACING FILL CUPREMOVING & REPLACING FILL CUP
REMOVING & REPLACING FILL CUPREMOVING & REPLACING FILL CUP
REMOVING & REPLACING FILL CUP
The appropriate break-out plug needs to be
removed from the fill cup for your model.
Check old ice maker.
Make sure the refrigerator is level front to back (adjust legs or rollers).
Loosen, Level I/M byLoosen, Level I/M by
Loosen, Level I/M byLoosen, Level I/M by
Loosen, Level I/M by
sliding left or right insliding left or right in
sliding left or right insliding left or right in
sliding left or right in
slot of bracket. Tighten.slot of bracket. Tighten.
slot of bracket. Tighten.slot of bracket. Tighten.
slot of bracket. Tighten.
Pull cup up and out of slot -Pull cup up and out of slot -
Pull cup up and out of slot -Pull cup up and out of slot -
Pull cup up and out of slot -
requires considerable forcerequires considerable force
requires considerable forcerequires considerable force
requires considerable force
RemoveRemove
RemoveRemove
Remove
plugplug
plugplug
plug