ELNA eXpressive920 - Base Plate; Base Cover; Bed Cover

3
Base plate
To remove:
1. Remove the setscrews A (3 pcs.).
2. Remove the setscrews B (2 pcs.).
3. Remove the base plate.
To attach:
Follow the above procedure in reverse.
Replacing External Parts (3 )
Setscrews A
Setscrew A
Setscrew B
Setscrew B
Base cover
To remove:
1. Remove the extension table.
2. Remove the setscrews C (4 pcs.).
Remove the setscrews D (3 pcs).
Remove the base cover.
To attach:
Follow the above procedure in reverse.
Base plate
Bed cover
To remove:
1. Remove the extension table.
2. Remove the setscrews E (2 pcs).
Remove bed cover.
To attach:
1. Follow the above procedure in reverse.
Setscrews E
Bed cover
Setscrews C
Setscrews C
Setscrews D
Base cover