Emerson iPro - Commissioning the Device in E2 E

58 • iPro Case Controller I&O Manual FM V1.01 026-1738 Rev 1
15.4. Commissioning the Device in E2E
1. From the network summary screen highlight the first device and press to commission the device.
2. Select the BACnet MS/TP network, the E2E will then scan for available devices:
3. The E2E will display a list of the devices discovered during the scan:
Figure 15-5 - Commissioning the Device - Select BACnet MSTP Network
Figure 15-6 - E2E Scan for Available BACnet Devices