Emerson Rosemount 8800D Series

To Next Page

To Previous Page

Electronics Verification

March 2016

Reference Manual

00809-0100-4772, Rev FA

153

Electronics Verification

Figure C-10. Test Frequency Input Using the Ground Tab

Figure C-11. Test Frequency Input Using External Threads of Sensor Header

Aotewell Ltd

www.aotewell.com

Industry Automation

HongKong|UK|China

sales@aotewell.com

+86-755-8660-6182

Main Page

Table of Contents3
Using this Manual11
OUNDATION Fieldbus Technology11
System Description12
Overview13
Safety Messages13
User Interfaces14
Commissioning14
General Block Information17
- Modes of Operation17
- Block Instantiation18
Resource Block18
- FEATURES and FEATURES_SEL18
- Max_Notify19
- Plantweb ™ Alarms20
Transducer Block23
- Parameters23
- Xmtr_Mode23
- Process_Fluid23
- Reference K_FACTOR23
- Fixed_Proc_Temperature23
- Fixed_Proc_Density23
- Flange_Type23
- Pipe_Inside_Diameter23
- Damping23
- Filter_Auto_Adjust24
- Primary_Value_Range24
- Sensor_Range24
- Secondary_Value24
- Installation_Effects24
- Process_Density_Ratio24
- Meter_Display24
- Proc_Temp_Damp25
- Vel_Meas_Base25
- Tc_Failure_Mode25
- Lfc_Response25
- Calc_Proc_Density25
- Proc_Temp_Range25
- Elec_Temp_Range25
Analog Input (AI) Function Block26
- Filtering26
- Low Cutoff26
- March26
- Process Alarms27
- Alarm Priority27
- Status Options27
- Advanced Features28
Flow Simulation28
- Using Transducer Block Parameters28
- Configuration Software29
Device Capabilities29
- Link Active Scheduler29
- Capabilities30
Overview31
Safety Messages31
Environmental Considerations32
Meter Body Installation Tasks32
- Handling32
- Flow Direction33
- Upstream/Downstream Piping33
- Flowmeter Orientation34
- High-Temperature Installations36
- Steam Installations37
- Conduit Connections37
- High-Point Installation38
Hazardous Locations38
- Cable Gland39
- Gaskets39
- Meter Body Grounding39
- Flange Bolts40
- Wafer-Style Flowmeter Alignment and Mounting41
- Flanged-Style Flowmeter Mounting43
- Remote Electronics44
- Calibration46
Electronics Considerations46
- Grounding the Transmitter Case47
- Commissioning Tag48
- Foundation ™ Fieldbus Transmitter Power Requirement49
- Power Conditioning49
- Field Wiring49
- Hardware Configuration51
- Simulate Enable51
- Transmitter Security52
- LCD Display Option52
Transmitter Configuration52
Overview53
- Quick Transducer Block Configuration Guide53
Parameters and Descriptions55
- Block/Transducer Errors62
- Diagnostics63
- Alarm Detection65
- Status Handling65
- Error Conditions66
Flow Units66
- Standard/Normal Flow Units66
Transducer Block67
- Process Variables (PV)67
- Basic Setup67
- Flow Units68
- Sensor69
- Filtering72
- Display73
- Modes73
Parameters and Descriptions75
- Definition75
- Block Errors81
- Modes81
- Alarm Detection82
- Status Handling82
- Vcr82
- Troubleshooting82
Overview75
Overview83
Analog Input (AI) Function Block83
- Configure the AI Block83
Overview91
Safety Messages91
Troubleshooting Tables92
Advanced Troubleshooting98
- Tp199
Hardware Maintenance100
- Oundation100
- OUNDATION Fieldbus Electronics Boards102
- OUNDATION Fieldbus Electronics Housing103
- Replacing the Sensor105
- Replacing the Sensor: Removable and Integral Support Tubes106
- Remote Electronics Procedures110
- Coaxial Cable at the Electronics Housing113
  - Oundation114
- Temperature Sensor Replacement (MTA Option Only)115
- Troubleshooting a Remote Mount Cable116
Return of Material118
- A.1 Specifications119
- A.3 Performance Specifications122
- A.4 Physical Specifications123
A.5 Dimensional Drawings126
Product Certifications143
- B.1.1 Approved Manufacturing Locations143
- Flameproof Enclosure Ex D Protection Type in Accordance with IEC143
  - 60079-1, en 60079-1143
  - En60079-15143
B.2 European Directive Information143
B.3 ATEX Directive143
European Pressure Equipment Directive (PED)143
- Rosemount 8800D Vortex Flowmeter Line Size 40 MM to143
- Rosemount 8800D Vortex Flowmeter Line Size 15 MM and143
- B.5.1 North American Certifications144
- B.5.2 European Certifications144
- B.5.3 International Iecex Certifications145
- Chinese Certifications (NEPSI)147
- Brazilian Certifications (INMETRO)148
- EAC-Compliance with the Requirements of Technical Regulations149
  - Of the Customs Union149
C.1 Safety Messages159
Safety Messages159
- C.2 Electronics Verification160
- Electronics Verification Using Internal Flow Simulation161
- Internal Flow Simulation-Fixed Flow Rate161
- Internal Flow Simulation-Varying Flow Rate161
- Electronics Verification Using an External Frequency Generator162
- Exiting Flow Simulation162
- Calculating Output Variables with Known Input Frequency165
Electronics Verification160
Examples167
- English Units167
- C.3 Examples167
- SI Units169
  - C.3.2 si Units169
  - March170
Alerts171
D.1 Alerts171
Plantweb Alerts Overview177
Alert Configuration NE107 and Plantweb178
D.4 Alert Simulation181
Alert Simulation181

Emerson Rosemount 8800D Series - Page 163

Table of Contents

Other manuals for Emerson Rosemount 8800D Series

Related product manuals