6. Choose Don't simulate, De-energize, or Energize.
7.
Press MENU or EXIT to end simulation.
7.4.5 Procedure - synchronizing timers
Synch Timers is available only if two or more alarm relays have been configured as interval
timers.
1.
Press MENU.
The main Menu screen appears.
2. Move the cursor to Program and press ENTER.
3. Choose Alarms.
The summary display shows the current Synch Timers setting (Yes or No).
4.
To make a change, choose Synch Timers and press ENTER.
A screen appears in which the present setting can be edited.
5. Press ENTER to store the setting.
Programming the transmitter
Instruction Manual 51
To Next Page
Loading...
