Emerson Rosemount TCL - Procedure - Configuring Alarms and Assigning Setpoints

Operation of the Interval TimerFigure 7-3:
The numbers in parentheses are the allowed values for each timer parameter.
Synchronize
timer
If two or more relays are being used as interval timers, choosing
synchronize timers will cause each timer to start one minute later than
the preceding timer.
7.4.3 Procedure - configuring alarms and assigning setpoints
Complete the following steps to configure the alarms and assign setpoints.
1.
Press MENU.
The main Menu screen appears.
2. Move the cursor to Program and press ENTER.
3. Choose Alarms.
Programming the transmitter
48 Rosemount TCL